Post-construction window cleaning is its own kind of job, requiring different products, tools, and knowledge than a standard window clean. Construction leaves a unique combination of residue on glass that soap and a squeegee can’t remove. Bay Windows has been handling post-construction window cleaning for residential and commercial projects throughout Mobile, Baldwin County, and the Eastern Shore for over three decades.
Whether you’re a general contractor wrapping up a commercial buildout on Airport Boulevard, a homebuilder with a walkthrough in Fairhope, or a homeowner finishing a major renovation and wanting the glass done right before the furniture goes back, this is what we do!
Construction leaves a unique combination of residue on glass that soap and a squeegee can’t remove.
Post-construction window cleaning is not the same service as scheduled maintenance cleaning. The process, the products, and the scope are different because the problem is different. What lands on glass during a construction project is chemically and mechanically unlike everyday exterior grime. It doesn’t rinse off, it doesn’t respond to standard glass cleaner, and the wrong approach doesn’t just fail to clean it; it can permanently damage brand-new glass.
Bay Windows has been removing construction residue from new glass in Mobile for over thirty years. We know what ends up on the windows, we carry the products and tools appropriate for each type of residue, and we know how to remove it without causing damage to the glass itself.
The list of what construction activity leaves on glass is longer than most people expect:
Most new windows ship with protective stickers and labels on the glass, on the frame, and on the hardware. The adhesive those labels leave behind bonds to the glass and requires specific solvents to remove safely without scratching.
Sometimes paint just lands on the glass, and some soap and water won’t solve that problem. Dry paint on windows requires a commercial cleaning solution and experienced window cleaning technicians who can adjust their method based on the type of glass.
Window installation involves caulk. Some of it ends up on the glass face and cures hard. Silicone that has set requires targeted solvent removal. The wrong product leaves a haze behind; the right one removes it cleanly.
Interior drywall work generates dust and occasional splatter that migrates onto nearby glass and dries against the pane. On glass near doors and openings, it can accumulate heavily.
Exterior masonry work like brick, block, stucco, and stone puts mortar and concrete splatter onto the surrounding glass. On coastal properties where stucco finishes are common, this is one of the more stubborn residues Bay Windows removes.
Protective tape used on frames and hardware during construction leaves an adhesive strip when removed. That adhesive bonds and requires solvent to clear fully.
Every set of hands that touched a window during installation left something behind. At scale, on a new commercial buildout with hundreds of windows, this is substantial dirt and dust accumulation.
Bay Windows cleans every type of residue listed here and more. We use the appropriate product and tool for each residue type on each glass type. We have been doing this for over 30 years; we are ready to be your partner at closeout!
Bay Windows cleans both interior and exterior glass on new construction projects.
Interior glass at the end of a construction project typically carries: new window sticker labels and adhesive, silicone smears from the installation crew, fingerprints and handling marks, drywall dust ground into interior sills, and overspray from interior painting if windows were near painted surfaces.
Exterior glass tends to carry a heavier construction load: paint overspray from exterior work, mortar and concrete splatter from masonry, roofing and gutter debris that came down onto glass during installation, exterior caulk smears, and the general accumulation of construction dust baked onto glass by sun and heat during a long project.
On Gulf Coast projects, that heat accelerates how quickly residue bonds to glass, which is one reason we recommend getting the final window cleaning done quickly after subcontractors finish.
The timing of the window cleaning service on new construction matters. If you schedule too early, before painters and caulkers are done, you’ll find that the window cleaning has to be done again. On the other hand, if you schedule too late, dried residue becomes harder to remove cleanly, especially on exterior glass that has been sitting in Alabama heat.
The right time to call Bay Windows: after all paint, caulk, and silicone work is completely finished and before the homeowner walkthrough or certificate of occupancy inspection.
For most new construction and commercial buildouts in Mobile and Baldwin County, Bay Windows can mobilize within 48 to 72 hours of your confirmed ready date. Call with your project timeline, and we coordinate around your closing schedule.
Multi-phase projects have a different schedule, covered in the section below. For projects where punch list teams return after the final clean (touch-up painters, finish carpenters, caulkers) there’s a strong case for a second pass after they are off the property. That’s the phase most projects skip, and the one that makes the most visible difference at move-in.
Bay Windows is here to help anyone who is going through a construction or renovation project that needs the windows cleaned right. That includes general contractors managing commercial buildouts, residential homebuilders with new construction in Mobile and on the Eastern Shore, renovation contractors finishing major remodel projects, and property managers and developers coordinating multi-tenant closeout.
Bay Windows shows up when scheduled. When we’re done, the glass is clear.
General contractors at closeout are managing five trades at once and do not need another vendor that requires hand-holding.
Bay Windows shows up when scheduled. We coordinate directly with whoever is running the job, and we work around the closing schedule without becoming part of the problem. When we’re done, the glass is clear.
We work on commercial buildouts and tenant improvements throughout Mobile, including downtown, Airport Boulevard corridor, the Spring Hill medical district, and Eastern Shore commercial development in Daphne and Spanish Fort. We coordinate directly around inspections and project deadlines. Bay Windows is licensed and insured and can provide documentation for your project file on request.
The new homeowner is moving in on a specific date, and windows that aren’t clean on walkthrough day are a punch item that slows the closing.
Bay Windows has been providing new construction window cleaning in Mobile, AL for over thirty years. We understand the timeline, we understand that new windows have coatings and warranties that require careful handling, and we understand what a homebuilder needs from a window cleaning vendor at the end of a project: the glass done right, on schedule, without creating another item on the list.
We serve residential homebuilders across Mobile and the Eastern Shore, from new construction in Daphne, Spanish Fort, and Fairhope to custom home builds throughout the greater Mobile area or the newer subdivisions north and west of the city.
Major renovation projects leave construction dust and residue on every window in the house, not just the ones near the work zone. A kitchen addition generates drywall dust that migrates through the living room. A master bath remodel puts silicone and adhesive on the nearest windows. A whole-home renovation leaves the homeowner returning to glass that has been through months of construction activity.
Bay Windows provides post-renovation window cleaning as the final step before the homeowner comes home, clearing construction residue, dust, and debris from windows, frames, and tracks. The result is a house ready for the homeowner to walk back into, not a house that looks like construction just finished.
Commercial real estate developers and property managers coordinating a multi-tenant buildout have a consistent problem at closeout: too many vendors, not enough time, and a move-in deadline that doesn’t move.
Bay Windows works directly with property management companies and commercial developers across Mobile and Baldwin County to ensure the windows are ready for move-in or inspection deadlines. We have been coordinating around tenant move-in schedules and handling multi-tenant properties where multiple units need windows done in a sequenced timeline for over 30 years. We aren’t a team you will have to manage through every step of the process.
Paint overspray, silicone, construction adhesive, and mortar on new glass are not removed with standard glass cleaner and a squeegee. Each type of residue requires specific commercial window cleaning products. Those products have to be safe for the specific glass type, and on a new construction project, the glass type matters more than in older buildings.
Low-E coatings, tempered glass, laminated glazing, tinted glass, and specialty architectural glazing are all common in new residential and commercial construction. Each has different tolerances. A solvent that removes adhesive safely from standard float glass may damage a low-E coating. A razor blade that’s appropriate on some tempered glass is risky or wrong on others. Getting this wrong doesn’t just produce bad results; it voids the window manufacturer’s warranty.
Bay Windows is the trusted window cleaning company for new construction throughout Mobile because GC’s know we carry the products and tools appropriate for each combination of residue and glass type, and we know how to make decisions at the glass.
Bay Windows has been working on construction and post-construction projects in Mobile since before the Eastern Shore had the traffic it has now. We’ve cleaned the glass on custom homes in Fairhope and on commercial buildouts downtown. We’ve worked in the Airport Boulevard corridor when it was quieter and as it grew. We’ve been on projects across Daphne and Spanish Fort through every phase of Eastern Shore development.
Thirty years is not just time. It is thirty years of Mobile summers, which bake construction residue onto glass faster than most markets. It is thirty years of Gulf Coast humidity and salt air as a factor in how quickly new exterior glass accumulates post-construction debris. It is knowing which conditions mean a post-construction clean needs to happen sooner rather than later, and which glass types at which construction phase need extra care.
Bay Windows provides post-construction window cleaning throughout Mobile and the surrounding region.
Downtown Mobile is one of the most active commercial renovation and buildout markets in the area. Historic building conversions, restaurant and retail improvements along Dauphin Street, commercial office work in the Government Street corridor, and mixed-use development near the waterfront all bring post-construction window cleaning needs that Bay Windows has been addressing in this territory for decades. We know downtown Mobile’s commercial architecture, the older facades, the historic glass, and the buildings where the construction conditions require extra care. We’ve been on these properties long enough that most of them aren’t new to us.
Spring Hill is where Bay Windows built much of its residential reputation, and the post-construction side of that work on new construction homes, medical office buildouts in the Spring Hill Medical District, and commercial improvements along the major corridors is a consistent part of what we do there.
Airport Boulevard is one of Mobile’s most active commercial renovation and buildout zones. The pace of commercial activity on this corridor creates ongoing post-construction window cleaning needs that Bay Windows serves as a regular part of its schedule.
The Eastern Shore is the fastest-growing residential and commercial construction market in the greater Mobile area. For Bay Windows, that growth has been a consistent part of our territory for years.
Daphne has seen sustained residential subdivision growth alongside commercial development near the Eastern Shore Centre and Highway 90 corridor. Spanish Fort has developed significant residential communities and commercial activity along the Eastern Shore Expressway. Fairhope continues to draw high-value custom home construction alongside commercial renovation in its historic downtown. These are all the kinds of projects where the quality of the final product matters and where Bay Windows’ thirty-year track record in new construction window cleaning is exactly what a homebuilder or GC is looking for.
More on our Eastern Shore work: window cleaning in Daphne, AL.
Bay Windows serves the full geographic range of the greater Mobile area. We cover North Mobile through Saraland and South Mobile through Theodore and Tillmans Corner.
Industrial facility window cleaning for manufacturing and warehouse properties in these areas is available. Call to confirm details and availability for industrial-scale projects. Bay Windows services commercial and industrial properties up to approximately six stories.
Bay Windows doesn’t create ripples.
The single most important thing a general contractor or builder needs from a vendor at closeout is simple: they need to know the vendor is going to show up.
Not theoretically show up. Show up on the day scheduled, ready to work, without requiring a follow-up call to confirm or a check-in to make sure they remembered the access details. At closeout on a construction project, every trade that doesn’t run on schedule creates a ripple. Bay Windows doesn’t create ripples.
We’ve been in the Mobile construction market for over thirty years. A company still operating in the same city after three decades, with recurring relationships with builders and GCs who keep calling us back, has answered the reliability question — not with a promise, but with a track record. The GCs who’ve worked with Bay Windows at closeout know that once they call us, the windows are handled. They stop thinking about it. That’s the outcome.
When we’re on a construction project, we coordinate directly with whoever is running the job. We work around the closing schedule. We communicate about what we’re seeing on the glass and flag anything worth the GC’s attention before we leave. We do not show up, do a partial job, and disappear. We do not make the punch list longer.
Bay Windows is fully licensed and insured for commercial and residential post-construction work. We can provide licensing and insurance documentation for your project file on request — standard practice for any vendor on a commercial project, and something we’re prepared for when you call.
The transformation most of our GC and builder clients describe the same way: “That’s one less vendor I have to think about.” That’s exactly what we’re going for.
We remove all construction residue from glass surfaces — sticker labels and adhesive from new windows and doors, paint overspray, drywall compound and plaster splatter, silicone and caulk smears, concrete and mortar residue, tape adhesive on frames, and fingerprints and handling marks from installation crews. We clean both interior and exterior glass, and we include frames, sills, tracks, and weep holes — not just the glass face. Every surface that came into contact with construction activity is addressed before we call the job done.
Construction residue is chemically different from everyday grime. Paint, silicone, adhesive, and concrete require specific products and techniques to remove safely — especially on new glass with low-E coatings, tempered construction, or specialty glazing. Using the wrong product or tool can scratch the glass or damage a factory coating, which creates a warranty issue for the builder or property owner.
We've been doing post-construction window cleaning in Mobile for over thirty years. We know what's safe on new glass and what isn't, and we carry the products and tools to match each residue type to each glass type on every project.
We recommend scheduling after all paint, caulk, and silicone work is completely finished. Cleaning before painters and caulkers are done means starting over on any glass that gets overspray or smears after the clean — which defeats the purpose.
For most new construction and commercial buildouts in Mobile, we can mobilize within 48 to 72 hours of your confirmed ready date. Call with your project timeline and we'll coordinate around your closing schedule. For large commercial projects with specific CO inspection or move-in deadlines, earlier notice gives us the best ability to hold your date.
Yes. We provide post-construction window cleaning for custom homes, production residential builds, commercial buildouts, office tenant improvements, retail renovations, medical office construction, and major renovation projects throughout Mobile and Baldwin County. Unlike some cleaning companies that focus exclusively on commercial construction, Bay Windows works with residential builders and homeowners as well. If your project is new construction or post-renovation — residential or commercial — call and we'll confirm scope.
We remove window sticker labels and adhesive, paint and primer overspray, silicone caulk smears, drywall compound and plaster splatter, concrete and mortar residue, tape adhesive on frames, construction film and protective coating residue, and fingerprints and smudges from installation crews. Windows are what we do — we carry the products and tools for each type of glass and each type of residue, including low-E coated windows and specialty glazing common in new construction. If you have a specific residue situation on a project, call us and describe what you're working with.
Yes. We can structure post-construction window cleaning across multiple project phases — a rough clean during active construction, a comprehensive final clean before the walkthrough or CO inspection, and a targeted touch-up clean after punch list trades have returned and finished paint, caulk, and hardware corrections. The touch-up clean is the most frequently skipped phase and the one that most directly affects how the glass looks at move-in versus sixty days later. Ask about multi-phase scheduling when you call — it's a conversation worth having before the project gets to closeout.
Yes. We coordinate directly with the GC, project manager, or on-site superintendent — whoever is managing closing trades. Scheduling, timing, site access, and any mid-project communications all go through whoever is running the job. We don't need to loop in the property owner or homeowner to get the windows scheduled; we work with your team the same way any other closing trade does. We can provide documentation of licensing and insurance for your project file on request.
We provide post-construction window cleaning throughout Mobile and the surrounding area — downtown Mobile, Spring Hill, the Airport Boulevard corridor, Saraland, Theodore, Tillmans Corner, Semmes, Daphne, Spanish Fort, Fairhope, and the broader Baldwin County market. If your construction project is in the greater Mobile metro or on the Eastern Shore, call and we'll confirm availability and scheduling for your timeline.
Call us directly and tell us about the project. Post-construction quotes depend on scope — number of windows, glass type, construction residue present, number of stories, and whether you're looking at a single phase or multi-phase clean. Most GCs and builders prefer a quick call before the final clean to confirm scope and hold a date on the schedule. We work around your closing timeline. No automated quote systems, no runaround — you're calling a local company that has been doing this in Mobile for a long time.
Bay Windows provides post-construction window cleaning throughout Mobile, Baldwin County, and the Eastern Shore. Whether you’re a general contractor finishing a commercial buildout, a homebuilder approaching final walkthrough, or a homeowner finishing a major renovation — call Bay Windows. We’ll coordinate around your closing schedule, confirm scope, and get the glass done right.
One call. One company. Handled.
